Do You Know How To Lay Flooring Vinyl For Your Bedroom

Do You Know How To Lay Flooring Vinyl For Your Bedroom

Dec 02, 2023

Have you ever thought of flooring vinyl for your bedroom?


Then I think you need to think again!

There are a lot of benefits to having vinyl flooring in your bedroom and also saving money.

Let’s have a look, shall we?

Flooring Vinyl For Your Bedroom?


Yes really…

How to Install Vinyl Flooring: Preparation Tips

No matter what your budget may be, self-stick vinyl is a great flooring option.

It’s affordable, durable, and comes in a variety of different styles and patterns.
Not so shabby I can say.

Not like the bold patterns and colours of yesteryear but mute and very nice designs that you might not have thought existed in vinyl before.

They are also highly resistant to dents, stains and scuffs.

So today we are going to go over how you can install self-stick, vinyl tiles,
Most vinyl tiles sold today have a peel-and-stick backing.

It’s a good product that makes the job of installation a little easier, which is why homeowners love it.

It’s important to point out that vinyl flooring must be used in a temperature-controlled environment before, during and after installation.

In fact, not acclimating the products for 48 to 72 hours in the room of installation may result in the failure of the adhesive.

Installation requires that you first properly prepare the subfloors before laying the tiles,

The adhesive is already on the back of the tile all ready to go:

The first step is surface preparation.

How To Install Self-Stick Vinyl Floorig

Self-Stick vinyl tiles can be installed over a variety of subfloors, including concrete plywood or sheet vinyl.

No matter what the surface it must be: free of old, adhesive, moisture and dust.

It must be smooth before any tile installation For porous floors like concrete or wood. You’ll need a latex floor primer.

The primer must dry completely before any installation occurs.
This is where we will plan out the installation.

With backing still on the tile, begin mapping out your tiles. Then start by identifying the centre of the bedroom you are working in.

Measure out the length and width of the room and draw guidelines from the centre of each wall using a chalk line.

Use the intersection of your lines to find the centre of the room.

This is a crucial step and will make sure you have enough tiles to finish the room.
Make sure all tiles are from the same lot and batch.
See also Are There Bed Bugs At Hilton Hotel?

Mixing tiles and planks can cause visual inconsistencies.

How To Install Tiles In A Bedroom

The tiles From the centre out start to place your tiles.

Avoid space at the edges of the room.

Adjusting the arrangement of the tiles.

You don’t want less than 6 inches.

Peel The Backings And Apply The Tiles

Remove the backing from the first placed tile in the centre of the room.
Press it down firmly.

To keep the work area clean, have a rubbish bag or small can handy.
While you work collect the release papers as they are removed.

The next tile should be installed tightly against the edge of the initial tile.
Install the remaining tiles in a step pattern working one section at a time.

Fix Any End Tiles

It is very possible that the last tile in a row may need to be cut to fit.
Trim the tile by placing it over the last full tile.

Then place another full tile against the wall. Use this method to mark a cutting line where the tiles overlap.

For irregular cuts, make a pattern and transfer it to a tile score the top of the tile gently test the template to ensure it fits.

How To Install Tile In A Bedroom

Then, if it’s set, you can remove the backing and place the tile.

Be sure to place the cut against the roll of your floor to assure your tiles are set firmly it is important to use a roller on the finished tiles.

Roll back and forth in both directions to bond the tiles to the floor. Install the wall base and mouldings to complete the project.

Once finished, I suggest waiting five days before washing the flooring vinyl.


You really need to do this – so don’t spill anything on it, will you?

Self-Stick vinyl tiles are not only easy to install they are a beautiful addition to your home.

Plus they are extremely durable and maintenance-free.

Before you go ahead and get your floor started, make sure you have all the right resources tool-wise…

You will need a tape measure, a chalk line, a utility knife, a carpenter’s square, and a roller. Your subfloor will determine what you’ll need to prepare it.

As you can see, flooring vinyl is a bit like laying down tiles. But not as hard in many ways.